REFLECON tarnish Typ 1

Volatile matting agents

REFLECON® tarnish Type 1 products are volatile. They sublimate and evaporate residue-free.

 

Affecting factors of sublimation time:

  • Temperatures:
    Higher temperatures of matting agent, measuring object and ambient temperatures, here especially >30°C, reduce the sublimation time, lower temperatures increase the time.
  • Structure of surface:
    Rough surfaces increase the sublimation time, smooth surfaces reduce the time.
  • Thickness of matting agent layer:
    Applicate a thick layer of matting agent to increase the sublimation time enormously.


Important Information:

  • Contamination of measuring objects can cause residues of matting agent on the surface!
  • Please note that the state of aggregate changes at temperatures below 5°C. When the temperature rises up above 5°C the state of aggregate will normalize again.


Material Suitability:

  • Metal and non-metal
  • Thermoplastic resins  (PC, PP, PU or ABS)
  • Glass
  • Ceramic
  • Polyester, cotton , PLA fabrics
  • Single-component lacquer coatings, plastics, rubber: Suitability see product table

If you have any questions, do not hesitate to contact us!


DOWNLOAD product information (PDF 724 KB)

DOWNLOAD customer information - ToF SIMS analysis (PDF 353 KB)

REFLECON® tarnish-10-MC


Contrast: middle
Sublimation time: short
for small measuring objects

REFLECON tarnish-10-MC - flüchtiges Mattierunsmittel
  • 3D scanning spray - 100% free of Cyclododecane
  • Volatile matting agent for optical 3D laser measurement
  • Suitability for lacquer coatings and plastics: none
    (further information: see product information)
  • Solvent based
  • Odour reduced
  • Excellent wetting characteristic on the surfaces mentioned
  • Labelling see data sheet
    (available on request)
  • Creates homogeneous, smooth, fine, dispersed, white powder layer for a precise measurement
  • Homogeneity: very good
  • Powder layer is sublimating and evaporates residue-free
    (further information: see product information)
  • Sublimation time: short
  • No post-cleaning of the parts or surfaces needed
  • Contrast: middle
  • No dust residue while spraying
    >> saving the fan of laser equipment
  • Very good adhesion and removability of marker points on layer of matting agent at average layer thickness


Storage temperature:

  • 5-45°C


Minimum shelf life:

  • 4 years, stored at storage temperature


Delivery form:

  • Aerosol can, 500 ml
    (12 cans/box)

REFLECON® tarnish-11-HC


Contrast: high
Sublimation time: long
for large measuring objects

REFLECON tarnish-11-HC - flüchtiges Mattierungsmittel
  • 3D scanning spray - 100% free of Cyclododecane
  • Volatile matting agent for optical 3D laser measurement
  • Suitability for lacquer coatings and plastics: limited
    (further information: see product information)
  • Solvent based
  • Odourless
  • Excellent wetting characteristic on the surfaces mentioned
  • Optimized declaration of hazardous ingredients acc. to GHS - only flammable
  • Creates homogeneous, smooth, fine dispersed white powder layer for a precise measurement
  • Homogeneity: good
  • Powder layer is sublimating and evaporates residue-free
    (further information: see product information)
  • Sublimation time: long
  • No post-cleaning of the parts or surfaces needed
  • Contrast: high
  • No dust residue while spraying
    >> saving the fan of laser equipment
  • Very good adhesion and removability of marker points on layer of matting agent at average layer thickness


Storage temperature:

  • 5-45°C


Minimum shelf life:

  • 4 years, stored at storage temperature


Delivery form:

  • Aerosol can, 500 ml
    (12 cans/box)

REFLECON® tarnish-12-HC


Contrast: high
Sublimation time: long
for large measuring objects

  • 3D scanning spray - 100% free of Cyclododecane
  • Volatile matting agent for optical 3D laser measurement
  • Suitability for lacquer coatings and plastics: very good
    (further information: see product information)
  • Solvent based
  • Odour reduced
  • Excellent wetting characteristic on the surfaces mentioned
  • Optimized declaration of hazardous ingredients acc. to GHS - only flammable
  • Creates homogeneous, smooth, fine, dispersed, white powder layer for a precise measurement
  • Homogeneity: good
  • Powder layer is sublimating and evaporates residue-free
    (further information: see product information)
  • Sublimation time: long
  • No post-cleaning of the parts or surfaces needed
  • Contrast: high
  • No dust residue while spraying
    >> saving the fan of laser equipment
  • Very good adhesion and removability of marker points on layer of matting agent at average layer thickness


Storage temperature:

  • 5-45°C


Minimum shelf life:

  • 4 years, stored at storage temperature


Delivery form:

  • Aerosol can, 500 ml
    (12 cans/box)
     

REFLECON® tarnish-30-HC


Contrast: high
Sublimation time: middle
for large measuring objects

REFLECON tarnish-30-HC - flüchtiges Mattierungsmittel
  • 3D scanning agent - 100% free of Cyclododecane
  • Volatile matting agent for optical 3D laser measurement
  • Suitability for lacquer coatings and plastics: limited
  • (further information: see product information)
  • Solvent based
  • Odour reduced
  • Excellent wetting characteristic on the surfaces mentioned
  • Labelling see safety data sheet
    (available on request)
  • Creates homogeneous, smooth, fine dispersed, white powder layer for a precise measurement
  • Homogeneity: very good
  • Powder layer is sublimating and evaporates residue-free
    (further information: see product information)
  • Sublimation time: middle
  • No post-cleaning of the parts or surfaces needed
  • Contrast: high
  • No dust residue while spraying
    >> saving the fan of of the laser equipment
  • Very good adhesion and removability of marker points on layer of matting agent at average layer thickness


Storage temperature:

  • 5-35°C


Minimum shelf life:

  • 4 years, stored at storage temperature


Delivery form:

  • 1 L
  • 10 L